SPECIFICATIONS

 

 

 

 

 

USER MANUAL

⚠️ Attention!
Before using our chainsaw, please read this manual carefully to understand the proper use of your device.
Keep these instructions within easy reach.

---

CHAINSAW MANUAL

Read the operating instructions before starting the device or performing maintenance.

• Turn off the device and unplug it before cleaning or servicing.

• Do NOT leave the device in the rain or use it in wet conditions.

• Wear hearing and eye protection.

• Keep bystanders away.

• Always hold and operate the electric chainsaw with both hands.

• Never cut with the tip of the chainsaw, as this can cause kickback and result in injury.

---

SAFETY INSTRUCTIONS

⚠️ WARNING: When using power tools or garden equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury. Read all instructions before operating the device and keep them for future reference.

• Do not operate the device in explosive environments, such as near flammable liquids, gases, or dust.

• Keep children and bystanders away while operating power tools or garden equipment. Distractions can cause loss of control.

• The plug must match the outlet. Never modify the plug. Do not use adapter plugs with grounded tools.

• Avoid body contact with grounded surfaces such as pipes, radiators, and refrigerators.

• Do not expose tools to rain or moisture.

• Never carry or pull the tool by the cord. Keep cords away from heat, oil, sharp edges, and moving parts.

• Use an outdoor-rated extension cord when operating outside.

• Stay alert and use common sense.

• Do not operate the device if you are tired or under the influence of drugs, alcohol, or medication.

• Always use safety equipment such as protective glasses, dust masks, non-slip shoes, helmets, and hearing protection.

• Remove adjustment tools before turning the device on.

• Maintain proper footing and balance at all times.

• Wear appropriate clothing. Avoid loose clothing, jewelry, and keep hair away from moving parts.

• Do not force the tool—use the correct tool for the job.

• Do not use the device if the switch does not turn it on or off.

• Unplug the device before making adjustments, changing accessories, or storing it.

• Store out of reach of children and untrained persons.

• Use the device only as described in this manual.

• Have the tool serviced only by qualified personnel using identical replacement parts.

---

Symbols on the Machine

The machine includes symbols for safe operation:

• Fuel refill connection – located on the fuel tank cap

• Chain oil refill – located on the oil cap

• Switch indicator – turning to “O” stops the engine

• Choke indicator – pulling the knob closes the choke

• Chain oil adjustment nut – “Min” decreases flow, “Max” increases flow

(Additional markings indicate the positions of the H needle, L needle, and idle adjustment screw.)

---

Before Using the Device

• Read the manual carefully.

• Never use the device under the influence of alcohol, drugs, fatigue, or medication.

• Do not run the engine indoors — exhaust contains harmful carbon monoxide.

• Never use the device:

  • On slippery ground

  • At night or in poor visibility

  • During severe weather

👉 Limit operation to about 10 minutes per session with 10–20 minute breaks, and no more than 2 hours per day.

Always pass this manual along if selling or lending the product.
Never allow children or untrained persons to use it.

---

Protective Equipment

Wear:

• Helmet

• Safety goggles

• Heavy-duty gloves

• Non-slip work boots

• Hearing protection

Carry:

• Tools and files

• Fuel and chain oil

• Warning markers (ropes/signs)

• A whistle

• An axe or saw

Never operate barefoot, in sandals, or with loose clothing.

---

Fuel Safety Warning

• The engine uses a highly flammable fuel mixture.

• Never refuel near flames, sparks, or heat sources.

• Do not smoke while refueling.

• Turn off the engine before adding fuel.

• Clean up spilled fuel before restarting.

• Move at least 10 ft (3 m) from the fueling area before starting.

---

Starting the Engine (Basic Overview)

1. Fill fuel and chain oil and tighten caps.

2. Set the switch to the start position.

3. Hold the throttle and lock.

4. Pull the choke closed.

5. Place the saw firmly on the ground and pull the starter rope.

⚠️ Never start the chainsaw while holding it with one hand.

Allow the engine to warm up slightly after starting.

---

Checking Chain Oil

Run the chain at medium speed and confirm oil is flowing.
Adjust oil flow with a screwdriver if necessary.

👉 Always refill chain oil when refueling.

---

Carburetor Adjustment

The carburetor is factory set but may need fine tuning depending on conditions.

• Stop the engine before adjustments.

• Ensure filters are clean and fuel is properly mixed.

• Adjust idle so the chain does not rotate.

---

Fuel Mixture

Use regular gasoline mixed with quality 2-stroke engine oil.

✅ Recommended ratio: 25:1

Never use old or recycled oil.

---

Kickback Warning

Kickback occurs when the guide bar tip touches an object or the chain gets pinched.

To reduce risk:

• Hold the saw firmly with both hands

• Keep the cutting area clear

• Cut at high engine speeds

• Never cut above shoulder height

• Maintain chain sharpness

• Use only approved bars and chains

---

Important Maintenance Warning

Metal parts become extremely hot after shutdown.
Leave repairs not listed in this manual to a qualified service dealer.